Best Heavy Duty Shocks For Trucks In

Check out our reviews of the best heavy duty shocks for trucks in order to find which ones are worth buying. We review and list some of the top models on the market.

The Best Heavy Duty Shocks For Trucks in 2022

List Best Heavy Duty Shocks For Trucks In Review

2 Truck Upfitters 12" Gas Props (12.2" ext, 7.5" comp, 40 lbs ea) for are Snugtop Leer Camper Doors & ONLY Aluminum Weatherguard ONLY Toolboxes. Measurement REQ'D! Incl 4 Ball mounts!

$29.99  in stock
Amazon.com
as of May 17, 2022 5:07 am

Features

  • CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
  • Truck Upfitters Pair (2 total) of 40 pound (each) gas struts. 12.2" extended length and 7.5" compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 40 lbs of pressure, for a total of 80 lbs of pressure. Please note that this does not mean that it can lift something that is 80 lbs. the typical hinged-style door weight for this prop is approximately 50-70 lbs, including the weight of the camper shell locks and keys.
  • These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
  • Equivalent to Suspa #C16-11028, Stabilus #19068, or Weatherguard 7009-2PK . Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors & awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, other toolbox struts, etc. These gas shock lift supports CAN'T be compressed by hand. They MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position.
  • NOT FOR STEEL TOOLBOXES- WILL NOT HOLD UP LID. Fit most Weatherguard ALUMINUM truck bed toolboxes ONLY, models 121-0-01, 121-5-01, 123-0-01, 123-5-01, 127-0-01, 127-5-01, 131-0-01, 131-5-01, 137-0-01, 137-5-01, 147-0-01, 147-5-01, 154-0-01, 154-5-01. Compatible with many truck canopy types, including LEER, ARE, Century, Snugtop, and ATC tops, & many other brands that utilize gas shocks / gas springs / gas lifts. Compatible with many gas lift brands, including stabilus, lift o mat, & Suspa.

Monroe Shocks & Struts Load Adjusting 58654 Shock Absorber

$99.49  in stock
28 new from $99.49
2 used from $63.66
Free shipping
Amazon.com
as of May 17, 2022 5:07 am

Features

  • REDUCES SAG UNDER LOAD -- Ideal for occasionally hauling or towing varying loads; heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission; see owner's manual)
  • EXCEPTIONAL HANDLING -- Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
  • CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
  • LONGER SERVICE LIFE -- Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
  • IMPROVES PERFORMANCE -- Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade

C1608054 20" Gas Prop Spring Strut 20 inch 100 Lb Per Shock C16-08054 for Camper Shell RV Bed Tonneau Cover Storage Box Basement Door Floor Hatch Window Lift Struts (Applicable Lid Weight 85-110LBs)

$28.99  in stock
Amazon.com
as of May 17, 2022 5:07 am

Features

  • ✅ ARANA 20 inch Gas Struts C1608054 Lift Supports -- 2Pcs Set Force 100 Pounds 445N Gas Shocks , most SUITABLE support weight for 2 STRUTS is 85 lbs - 110 lbs, this means if your project lid is between 85 pounds and 110 pounds, this 100LB gas strut set is SUITABLE!
  • ✅ ARANA 20 Inch 100 Lbs Gas Spring Shocks -- Extended Length A [in]: 19.7(500mm), Compressed Length B [in]: 11.8(300mm), Interchange number: 6939, 6939S10, C1608054, C16-08054; measurement of the supported lid weight or of your old strut pressure is required to prevent purchasing wrongly!
  • ✅ C16-08054 Gas Props 20inch -- Direct replacement struts for RV bed, motorhome bed, tanning bed, camper bed, travel trailer bed mattress, queen bed, etc.;Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!
  • ✅ ARANA C1608054 100 lb Lift Supports -- Customer will also use them on tonneau cover, heavy camper shell roof, tv cabinet door, trailer window, compartment door, floor hatch, truck cover, bar shed window, heavy custom build lid, etc; Very Strong, do not buy them for the lid weight less than 80 pounds;
  • ✅100% Satisfaction Service -- 18 Months Support comes with every ARANA product; If any questions before purchasing or dissatisfactions after purchasing or need installing/using guide, welcome to click "ASK SELLER" besides your order from ARANA for immediate assistance!

23 Inch 100lb/445N Per Gas Shock Strut Spring for RV Bed Boat Bed Cover Door Lids Floor Hatch Door Shed Window and Other Custom Heavy Duty Project, Set of 2 Vepagoo

$24.99  in stock
Amazon.com
as of May 17, 2022 5:07 am

Features

  • 【APPLICATION】Most used for Heavy-Duty equipment such as bed compartment, outdoor TV Cabinet, RV Bed,marine projects, Boat Bed, camper shell, Boat Bed, truck canopy, trap door, trailer door, trash bin, and Heavy projects.
  • 【PARAMETER】Extended Length: 23 Inches (589mm). Force: 445N/100Lbs Per Strut. No screws included. The ball Connector is removable and rotatable.
  • 【STRONG】100LB/445N per shock, two are 200b/890N. Super Strong and stiff, you couldn't compress them by your hand!!
  • 【TIPS】If you feel it is too powerful to close and you have a lot of flexibility in where they can mount, you can move the mount point on the lid towards the hinges' direction. IF YOU DON’T KNOW HOW CHOOSE THE MOUNT BRACKET POINT, CONTACT US!
  • 【12+1 MONTH REPLACEMENT】 Welcome to Click "Ask Seller" BESIDE YOUR ORDER for In-time Assistance if any problem occurs.

Monroe 58637 Monroe Load Adjust Shock Absorber

$111.81  in stock
21 new from $111.81
Free shipping
Amazon.com
as of May 17, 2022 5:07 am

Features

  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction
  • Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability
  • Made in China

C1618002 30.9in 90lb/400N Heavy Duty Gas Shock Strut Spring Lift Support for Truck Bed Tonneau Cover Camper Shell Topper Outside RV Kitchen Door RV Bed

$30.99  in stock
Amazon.com
as of May 17, 2022 5:07 am

Features

  • 【Truck Tonneau Cover Lift Support】30.9in 50Lb/400N Lift Support compatible with pickup bed tonneau cover, undercover, truck bed cover.
  • 【Interchage Number】753041, C1618002, C16-18002, ML2890, ML28-90, ML-28-90, SL2890, SL28-90, SL-2890, SL-28-90, SL28901, SL28-90-1, SL-28901, SL-28-90-1, SL28905, SL28-90-5, SL-28905, SL-28-90-5, ST309P90. Check the Original cylinder has the above interchange number for an exact match. If you can't find the interchange number, please measure the length OEM from the center of the socket to the center of the socket before purchasing. Our gas spring is not suitable for all Tonneau Cover.
  • 【Product Parameter】Extended Length [in] 30.9, Compressed Length [in] 17.1.Connection: Ball Socket (Steel)=10mm.Force(Lbs):90 per strut.
  • 【For DIY Project】 For DIY projects, e.g. RV outside Door, RV Cabinet Door, Heavy-duty Trap Door, Outdoor TV Cabinet, Shed Window. Please measure the size, length, width and weight of the project before choosing. 30in 90lb gas strut work for items with sides approximately 60 inches long and lid weighing 67-90lbs.
  • 【12+1 Month Replacement Service】Welcome to Click "Ask Seller" BESIDE YOUR ORDER for In-time Assistance if any problem occurs.

[2 Pack] EZGO Medalist/TXT Front/Rear Coil Over Heavy Duty Shocks 1994+ Newer Gas or Electric 70630-G01

$69.85  in stock
2 new from $69.69
Free shipping
Amazon.com
as of May 17, 2022 5:07 am

Features

  • Includes: 2 x 18" Heavy Duty Shocks includes all the needed bushing hardware.
  • Fits the Following Carts: 1994-Up EZGO TXT/Medalist gas and electric models. (Will not fit on Marathon or RXV Golf Carts)
  • IMPORTANT: If it's a little too long for you please compress the springs to get them to fit.
  • Part of your vehicle's rear suspension that along with the spring, controls the up-and-down motion of your wheels. Shocks should be replaced if you experience leakage or bottoming-out.
  • 1 year unlimited-mileage quality guarantee

What are the Best Heavy Duty Shocks for Trucks?

A truck’s suspension is made up of the shocks that are installed on the vehicle. There are a number of different products available, including air and coil-over-wheel leveling systems. The air-leveling system relies on valves to regulate pressure that goes up and down in case of a change in terrain or load. These suspensions are made with rubber, while other use polyurethane as the material.

What should I look for in a Heavy Duty Shock for my Truck?

A good heavy duty shock for a truck should have a reservoir and valving system that is not too complicated. This will keep the cost down as opposed to buying individual components. The shock should also have more than one piston location so that it can be used on multiple applications.

Does weight matter when choosing your shock?

If you’re wondering whether you should go with a low or high weight shock, then the first thing to think about is your driving style. If you like to drive hard and fast, then a high-weight shock will be beneficial because it provides more control for manoeuvers. On the other hand, if you like to drive slower and more gently, then a low-weight shock is better since it gives less resistance.

How long will heavy duty shocks last?

The average lifespan of a shock is around 100,000 miles. However, the shocks that come with your car may last longer than the average. If you are looking to replace them, make sure you buy new ones from a reputable dealer and maintain them properly.

Comparison Table of the Best Heavy Duty Shocks for Trucks

The purpose of a heavy duty truck is to transport large loads or haul heavy objects. The trucks generally weigh in at around 10 tons and can go up to 40 miles per hour. A good shock absorber should be able to take all that weight and the bumps along the way without causing too much damage. These shocks also need to be able to last for years without wearing down or breaking down.

Leave a Reply

Your email address will not be published.